Search results for 'sea %2526 sea'

The vast amount of electronic data is exchanged between the camera, the flash or remote system via sockets and removable synchronous cables. With the robust and reliable S6 plug system and the especially sturdy spiral and standard cables in various lengths we offer you a durable and safe cable system.

With SEACAM cables we have standardized the S6 plug system; it conforms to the CE norms and is applicable for flash and remote use. We also deliver special lengths as well as adapters in the most varied formats.

AD Lens Holder is attached on Arm body for carrying maximum two of AD mount series attachment lens. AD Lens Holder gives easy access to another AD lens underwater and helps to carry without possible dropping off. You can choose single or double carriage configuration when you install the accessory on your Arm system.

■ Compatible Arm / Grip Base
Arm SS Body, Arm S Body, Arm M Body, Arm L Body,
YS Arm MS Body, YS Arm M Body
Grip Base D4
Grip Base M1
D Holder 
Grip Base DIII w / Rubber Grip
Grip Base DII w / Rubber Grip

■ Weight: 37.5g (1.3oz) [air] / approx.12g (0.4oz) [underwater] <片面取付時>
: 56.7g (2.0oz) [air] / approx.18g (0.6oz) [underwater] <両面取付時>

*Maximum number of AD Lens Holder.
Arm SS: 1, Arm S: 1, Arm M: 2, Arm L: 3, D holder Extesion Bar:1
**Left image show AD Lens Holder on Arm S. Arm S is sold separately.

M67 Lens Holder is attached on arm body to carry M67 mount series lens for easy and handy lens replacement underwater. M67 Lens Holder S carries single lens and M67 Lens Holder W allows to carry maximum two lenses.

■ Compatible Arm / Grip Base

Arm SS Body, Arm S Body, Arm M Body, Arm L Body,
YS Arm MS Body, YS Arm M Body

Grip Base D4
Grip Base M1
D Holder 
Grip Base DIII w/ Rubber Grip
Grip Base DII w/ Rubber Grip

■ Weight: 106g (3.7oz) [air] / approx.60g (2.1oz) [underwater]

*Maximum mountable number of M67 Lens Holder.
Arm SS: 1, Arm S: 1, Arm M: 2, Arm L: 3, D holder Extesion Bar:1
**Left image show M67 Lens Holder W on Arm S Body. Arm Body is separately sold.

●The UCL-165AD is compact and light-weight close-up lens with 16.5cm focal length to shorten minimum focus distance allowing you to get closer to a subject enabling high magnification close-up photography.

●Dual use underwater/land and usable with all zoom range. Even at same shooting distance, it is easy to capture a subject at desired size by adjusting zoom setting.

●The lens construction is 2 elements in 2 groups with high quality optical glass with inner coating to suppress optical aberrations more effectively and bring out optimal performance of combined master lens comparing to a lens using just one double-convex element.

●It is possible to stack multiple UCL-165AD lenses to allow for even higher magnification macro imaging. You can capture micro-world in entire image.

●Bayonet「AD Mount」compatible to support instant installation and speedy lens exchange underwater.

●The UCL-165AD is attached on compatible camera/housing via「AD Mount Base」「28AD Mount Base」(*1) or 「28AD Port」which is exclusively designed for each housing. For「28LD Mount Base」(*2) compatible housing, the UCL-165AD is attached on「28LD Mount Base」via「AD-LD Mount Converter for UCL-165AD」.

(*1) Optional 「AD Mount Converter for UCL-165AD」is necessary to attach the UCL-165AD on「28AD Mount Base DC35」, 「28AD Mount Base MCFT2」, 「28AD Mount Base MCFT1」, 「28AD Mount Base DC40」 or 「28AD Port PT-027/020」.

(*2) Optional 「AD-LD Mount Converter for UCL-165AD」 is necessary.

Silicone Grease

(Product No.01900)

SEA&SEA’s own brand of lubricant to keep O-rings supple.

O-ring Remover

(Product No.01920)

A tool to safely remove O-rings for cleaning and greasing without damaging the O-ring or O-ring channel.

Firmly attached by two cap bolts. Ten mounting holes to support various manufacturers' arm system.　

■ Effective length:  76mm (3.0in)
■ Weight:  46g (1.6oz) [air] / approx.28g (1.0oz) [underwater]
■ Compatible -Housing: X-2, X1-NZ, X1-LZ
                     -Base: System Base II system, Grip Base DII / DIII / D4 / M1
                     -Arm: Port Arm D
                     -Manufacture: Anthis, Kenko, Sea&Sea
■ Accessories:
  M6 cap bolt x 2, M5 cap bolt x 2, M6 flat washer x 2, M5 flat washer x 2,
  Allen wrench