Details
Precise "S-TTL" mode working with any manufactures' camera
Time proven technology as TTL auto shooting with an external strobe, high accuracy S-TTL auto mode equipping to support high-end digital camera as well as point & shoot digital camera (transparent housing) for simple shooting style without complicated aperture setting.
INON S-TTL auto works with any camera manufactures' model. You do not have to buy new strobe when you upgrade from point & shoot digital camera to other manufacture's high-end digital camera.
Fine adjustment to match with your taste even in TTL shooting
"S-TTL" Auto mode provides great usability beyond traditional TTL with its fine flash output adjustment to suits to your "real(preferable)" correct exposure or to compensate slightly different exposure program among different camera model/unit.
Next generation wireless TTL
The D-2000 Type4 successfully amplifies receiving optical signal from the slave sensor 20 times more comparing to previous D-2000 "Type3" to provide wireless S-TTL Auto mode without using a fiber optics. With optional Wireless Connection Kit, D-2000 "Type4" supports 2 way (wired/wireless) S-TTL Auto mode.
Supports professional needs
24 step External Auto mode compatible to support sophisticated lighting like shadow control with dual strobe by fine adjustment of flash output.
13 step Manual flash output setting the most in its class with 1/2 EV increments supporting professional lighting.
Conventional TTL exposure control is also supported for film camera system (*1).
(*1) Compatible with optically connected INON「X1 series」or「Optical Converter TTL」only.
Powerful G.N.20
Guide Number 20 (*2) increasing its flash output at approximately 30% comparing to D-180 strobe providing sufficient light to shoot distant subject.
(*2) Measurement in Air/ISO100 · m, Nominal value
Circular 110 degree beam coverage with a diffuser
Circular 100 degree beam angle without a diffuser
Patented "T-shape Twin Flash" structure produces wide circular beam angle [ 100° ] even without a diffuser and increased to [ 110° ]with a diffuser. This ideal circular strobe light distribution supports sophisticated angled lighting with strobe arm without strobe light vignetting caused by misalignment of strobe aiming.
Built-in high-intensity 180 lumen power LED
The Focus Light assists focusing in dark underwater without influence on an image by shutter-linked auto OFF feature (*3). The well-established bright LED Focus Light as D-2000 "Type3" has upgraded to 180 lumen to benefit you to use as independent diving flashlight.
(*3) Focus Light may be recorded on an image depending on camera system, connection method and shooting condition.
Integral pre-flash mode detecting function
Latest Nikon DSLR cameras like D700 / D300 / D200 / D90 / D80, alter number of pre-flash between "once" or "twice" depending on shooting condition making total flashes "twice" to "three times". The D-2000 fully accommodates with this complicated program and automatically identifies number of pre-flash to activate adequate program to support optically connected D700 / D300 / D200 / D90 / D80 with proper functioning of [External Auto] / [Manual] as well as precise ["S-TTL" Auto]mode. There is no problem on flashing, exposure accuracy or functional limitation which would be the case with existing strobe supporting single pre-flash only.
| Model | INON D-2000 Type4 |
| Strobe Control Mode (*1) | S-TTL Auto / External Auto / Manual / TTL Auto (*10) |
| Connection (*1) | Wireless connection / Optical D Cable / Optical Cable / Optical D Slave Cable |
| Guide Number (*2) | 20 [without diffuser] 17 [with optional -0.5 White Diffuser] 12 [with optional -1.5 White Diffuser] |
| Settable Flash Output (*2) | 20(FULL) 17(-0.5) 14(-1) 12(-1.5) 10(-2) 8.4(-2.5) 7.1(-3) 5.9(-3.5) 5.0(-4) 4.2(-4.5) 3.5(-5) 3.0(-5.5) 2.5(-6) (13 steps in 1/2EV increments) |
| Settable Aperture Value (*3) | F1.4+1/2EV. - F11 (1/2EV.increments, 12steps) F1.4+1/2EV. - F11+1/4EV. (1/4EV.increments, 24steps) |
| Focus Light (LED) Intensity | 180lm (*4) |
| Beam Angle | 100° x 100° circular beam [without a diffuser] 110° x 110° circular beam [with a diffuser] 20° [Focus Light (LED)] |
| Color Temp. | 5500K [flash light,without a diffuser] 5400K [flash light,with a diffuser] Approx. 6000K [Focus Light (LED)] |
| Recycle Time (*5)(*7) |
Approx. 1.8 seconds minimum : ["eneloop" batteries (*8)] Approx. 1.8 seconds minimum : [NiMH batteries (*9)] Approx. 2.3 seconds minimum : [Alkaline batteries] Approx. 2.5 seconds minimum : [Lithium 1.5V batteries] |
| Flash Capacity (*5)(*7) |
Approx. 420 flashes : ["eneloop" batteries (*8)] Approx. 520 flashes : [NiMH batteries (*9)] Approx. 400 flashes : [Alkaline batteries] Approx. 660 flashes : [Lithium 1.5V batteries] |
| Focus Light (LED) operable duration (*6)(*7) |
Approx. 3hrs 30 min : ["eneloop" batteries (*8)] Approx. 3hrs 30 min : [NiMH batteries (*9)] Approx. 2hrs 15 min : [Alkaline batteries] Approx. 4hrs 15 min : [Lithium (1.5V) batteries] |
| Compatible Batteries |
AA "eneloop"(HR-3UTG) x 4, or "new generation" NiMH batteries x 4 (*8) AA NiMH x 4 [good quality] (*9), AA Alkaline x 4, AA Lithium (1.5V) x 4 |
| Focus Light Mode | [Single mode] Shutter linked auto OFF (manually turns ON / turns OFF upon shutter release) [Continuous mode] Shutter linked auto OFF (manually turns ON / turns OFF upon shutter release / automatically turns ON after approx. 0.5 second) |
| Dimensions | Diameter: 99mm/3.9in. Height: 122mm/4.8in. Depth: 100mm/3.9in. (*Not including Slave Sensor and Arm Base) |
| Weight | [air] 544g / 19.2oz (without batteries) [underwater] Approx. 47g/1.7oz (with 4 "eneloop" batteries) |
| Working Temperature | 0°C~30°C / 32°F~86°F [*water temperature] |
| Storage Temperature | 0°C~30°C / 32°F~86°F [*air temperature] +50°C / 122°F (temporary allowable temperature limit) |
| Depth Rating | 100m / 328ft |
| Body Material / color | Polycarbonate resin / red |
| Package contents | Magnet, Magnet Screw, Magnet Screw Tighter, Spare O-ring (Battery Box), INON Grease, Light Filter Sticker·Red |