Email: sales@splashuwimaging.com
Phone: +632 7249803 / +632 6222976
Splash Underwater Imaging on Facebook Splash Underwater Imaging on Multiply | Login | Register

Sea & Sea YS02

Sea & Sea

₱15,000.00

Be the first to review this product

OR

Quick Overview



[Guide Number (ISO 100/m) (land)] 20
[Beam Angle] 100°x 100° (with diffuser 110°x110°)
[Batteries] 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes*1] A: 230 Ni-MH: 330
[Recycle time (full)*2] A: 2.5 sec. Ni-MH: 1.9 sec.
[Color temperature] 5600K
[Color temperature w/diffuser] 5250K
[Depth rating] 75m / 250ft
[Dimensions (WxHxD)] 68x108x129mm / 2.7x4.3x5.2inch
[Weight] 500g / 17.5oz
[Underwater weight] -5g / -0.2oz
[Others]
- Exposure control: Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- Slave function
- Auto power OFF function
- Sync cord: Fiber-Optic Cable (L-type)
- Over-pressure relief valve


Sea & Sea YS02 strobe

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Sea & Sea YS02 strobe
  • Front View
  • Rear View Controls

Details

From compact digital cameras to digital SLR cameras. 
A small manual slave strobe.

YS-02 (Black)
(Product No.03113)

Circular beam angle of 100°x100° and guide number of up to 20. The YS-02 is a new compact-type slave strobe that can be used for all applications from wide-angle to macro photography.
You can use the YS-02 as a manual slave strobe with the guide number control function, which can set the light level to any of ten levels. Accurate pictures that follow the photographer's intentions can be taken while the light level is adjusted with the guide number controller. The YS-02 is equipped with a pre-flash cancel mode (*1) that is compatible with a wide range of digital cameras with a pre-flash. Power comes from four AA batteries for a powerful and long-lasting strobe, so you can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting.
You can fully exercise your creativity with the YS-02, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.

*1 Some digital cameras adjust flash levels after a first flash and then capture an image with a second (main) flash. This first flash is called the pre-flash. The strobe’s pre-flash cancel function ignores the pre-flash and synchronizes the strobe with the main flash.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

© 2008 Splash Underwater Photography. All Rights Reserved.