Special Order
IKELITE UNDERWATER HOUSING 50DL FOR NIKON D500
SKU:
Capture sharp, detailed photos and video at depths as great as 50' beneath the surface with IKELITE UNDERWATER HOUSING 50DL FOR NIKON D500 with DL Port Mount and Vacuum Valve. The back can be swapped out for an optional 200' dive back to allow you to go much deeper. An Ikelite bulkhead connector with a manual hot shoe connection enables reliable electrical triggering of optional, external strobes. Using an optional TTL hot shoe and the #4301.3 Nikon TTL Converter will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes will still work in manual mode only.
SPECIFICATIONS
- 50' (15m) depth rating
- Compatible with DL system lens ports
- 1/4-20 thread base mounts with 3.5" spacing
- Near neutral buoyancy in freshwater
- Actual buoyancy varies depending on the choice of lens and port
- 5 lb (2 kg)
- 2 x 7.1 x 6.3" (234 x 180 x 160 mm)
Construction Details
- The back can be swapped out for an optional 200' back
- Made by hand in the USA from corrosion-resistant polycarbonate and ABS plastic blend
- White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above water's surface
- Clear in back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls
- Nearly neutral buoyancy in freshwater
- Open-groove design suspends rear O-ring in a natural position, allowing for easier maintenance and preventing accidental twisting or stretching of O-ring
- The camera mounting plate enables quick installation and does not need to be removed in order for you to gain battery or memory card access
Strobe Connection and Operation
- Use of external strobe highly recommended for color-correction and adequate brightness, and basically essential once you descend further than 15-20' underwater
- Strobe restores hues that get absorbed by water, so your images are vibrant and accurate
- Try to stay no more than 3-4' away from the subject to preserve natural colors in images
- Ikelite ICS-5 bulkhead connector with manual hot shoe connection enables reliable electrical triggering of optional, external strobes
- Optional TTL hot shoe and Nikon TTL Converter #4301.3 enable TTL operation with compatible Ikelite DS strobes
- Non-Ikelite strobes, such as those from Sea & Sea, INON, and Nikonos, will still work in manual mode only
- Housing ships without required sync cord for strobe
Controls and Handling
- Ergonomic mechanical controls, including push-buttons, knurled knobs/dials, and levers
- Controls afford access to virtually all camera functions: shutter release, power, movie recording, sub-command dial, exposure compensation, ISO, mode button, white balance, metering, BKT button, lens release button, AF-ON, main command dial, multi selector, info, live view selector, Lv button, playback, menu, and OK
- Supplied aluminum tray with left-hand quick-release grip affords improved balance and handling while offering an attachment point for optional lighting arm
- Sensitive, redesigned trigger lever is extendable for comfortable use when holding optional right-hand quick-release grip
- Extra-large, soft-touch zoom knob located next to grip handle
- Control symbols are laser-etched into the back of the housing, so they won't fade or fall off with time
Lens Port System
- Ships without a required lens port
- Accepts all Ikelite Dry Lock (DL) series dome and flat ports for a broad array of zoom, macro, and wide-angle lenses
- Zoom gears are available for many lenses
- Complete port chart with full details coming soon
- DL port system accommodates lenses with large diameters
- Provides added security against leaks at the surface--thanks in large part to included vacuum valve for checking watertight integrity before dive
- Pump required in order to remove excess air and actually create a vacuum